sensors Accesorios SparkFun

Resultados: 54
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (CRC) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or solderi 4En existencias
Min.: 1
Mult.: 1
Sensors
SparkFun Accesorios SparkFun The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the 15En existencias
Min.: 1
Mult.: 1
Sensors
SparkFun Accesorios SparkFun This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch thus not making a connection.There are numerous us 19En existencias
Min.: 1
Mult.: 1
Sensors
SparkFun Accesorios SparkFun The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be limite 6En existencias
Min.: 1
Mult.: 1
Sensors
SparkFun Accesorios SparkFun One-Wire Ambient Temp Sensor MAX31820 21En existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (3 POS,M)
Hoja de datos
14En existencias
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 3 Position
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (2 POS,M)
Hoja de datos
26En existencias
45En pedido
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 2 Position
SparkFun Accesorios SparkFun Amphenol FCI Clinchr Conn. (3 POS,F)
Hoja de datos
8En existencias
Min.: 1
Mult.: 1

Connectors Female FCI Clincher Connector with 3 Position
SparkFun Accesorios SparkFun This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm). 1 282En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Stackable Header 3 Pin, Female 0.1in 62En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LilyPad Slide Switch 20En existencias
Min.: 1
Mult.: 1

Switches
SparkFun Accesorios SparkFun Piezo Element 81En existencias
Min.: 1
Mult.: 1

Accessories Audio Indicators & Alerts
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current 98En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. 88En existencias
150En pedido
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Fe 68En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea 24En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard green LED. The lens is 3mm in diameter and is diffused.Features:2.0-2.4 VDC forward dropMax current: 2 14En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun The new generation 18 pin PICAXE microcontroller now has parallel tasking touch sensors and more memory/RAM.See the Info Sheet for a comparison of features between the 18M2 and the 18M2+PICAXE is a neat entry-level microcontroller system that is rel 25En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LED - Basic Red 3mm 54En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Alligator Test Leads Multicolored 10 pac 211En existencias
Min.: 1
Mult.: 1
Test Equipment
SparkFun Accesorios SparkFun Photo interrupter photogate photodiode phototransistor whatever you want to call it this sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one uprigh 34En existencias
15En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.F 9En existencias
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun Accesorios SparkFun This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
Hoja de datos
105En existencias
63En pedido
Min.: 1
Mult.: 1

Sensors Mini Load Cell - 500g, Straight Bar
SparkFun Accesorios SparkFun This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
Hoja de datos
95En existencias
Min.: 1
Mult.: 1

Sensors Mini Load Cell - 100g, Straight Bar
SparkFun Accesorios SparkFun The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
Hoja de datos
61En existencias
Min.: 1
Mult.: 1
No
Sensors